1x wheel bearing for Porsche 924 2.0 125PS 914 front set FAG

1x wheel bearing for Porsche 924 2.0 125PS 914 front set FAG

Quality from the ball bearing specialist FAG

Description:
The central rolling bearings on vehicles are referred to as wheel bearings on vehicles, which lead the wheel over the wheel hub in the wheel carrier. In old vehicles, there are often pairs of storage from e.g. groove ball bearings and needle bearings, newer models usually have two -row slanted ball bearings. In the past, open roller bearings with separate shaft seals were also used. In the meantime, thanks to "functional integration", this has been replaced by camp lubricated. If a wheel bearing is defective, this is usually noticeable by "booming" noises on the cornering. The courageous wobbling on the bike can also provide information about the condition of the wheel bearings. With Porsche, the wheel bearings differ in their construction within a series depending on the model year. With us you will find a small selection of ball bearings of the wheel suspension for the front axle or rear axle of your Porsche.

The FAG company was founded in Schweinfurt in 1883 and has been producing rolling stores for vehicles since then, but at the beginning for bicycles. In 2001 FAG was bought up by the Schaeffler Group. One of the best -known areas of application from FAG, next to the automobile, are the pendulum roller warehouse in the hub of the Ferris wheel "London Eye".

Additional Information:

? Inner diameter: 17.45mm/29mm
? Outside diameter: 39.9mm/50.3mm
? Width: 14.6mm/14.7mm


Reference numbers:
311405625
311405625D
311405641B
311405645
311405641
311405645E
311405625E
311405625A


Scope of delivery:
Accordingly illustration

Suitable for:
914 (1.7/1.8/2.0)
924 2.0 125PS
Not for 914-6 / 931 Turbo / 924S
Installation location in front axle

Product Safety Information:
Manufacturer:
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3
91074 Herzogenaurach - DE
Email: info.de@schaeffler.com
Website: https://aftermarket.schaeffler.de/