Speedometer display for VW Golf 1 on-board computer instrument cluster motometer

Speedometer display for VW Golf 1 on-board computer instrument cluster motometer

exactly true to the original design

Description:
In this offer you will receive a complete set for repairing the display of your VW Golf 1 "MFA" multifunction display. The MFA was also used in other models from the time, and the display fits here too. But not with simple digital watches, where a different display is required.

After many years of use and frequent temperature fluctuations, the sealing of the LCD elements eventually fails and the display "leaks". Although the entire component still functions fully, the numbers and symbols can no longer be fully read. The aging of the associated conductive contact rubbers is also a common reason for incomplete readability of the displays. Even if the liquid crystal display (LCD for short) is still fully intact.
As a "do it yourself" solution, you can also repair the display yourself as an inexperienced hobbyist using the components offered here as well as our support and illustrated instructions. The inner housing of the climate control on the Audi is usually not just clipped, but the clips additionally provided with elastic adhesive/silicone. This has to be cut open during dismantling. Apart from this special feature, no complicated assembly work or soldering is required.

Because aging of displays is a general problem, we generally advise against purchasing used “still intact” components. Here too, it is only a matter of time before the display no longer works. Replacing your own display is therefore always the cheaper option in the long term.

As a manufacturer of these components, we can offer wholesalers and retailers as well as workshops and repair shops special conditions for larger quantities. We are happy to answer any questions you may have.

No programming or anything similar is required after the repair.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
Attention, this product offered is a partial component of the component with the following OE number(s). Because our item is not listed separately with its own OE number as a spare part by the vehicle manufacturer. To make it easier to find and assign, the OE numbers of the associated assembly are listed here:

155919033Q
191919033FM,   191.919.033.FM,   191 919 033 FM
151919044G
191919033LR,   191.919.033.LR,   191 919 033 LR


Scope of delivery:
1 display, 2 conductive rubbers, 2 light bulbs, 1 UVEX cloth

Suitable for:
VW Golf 1 with motometer speedometer with multifunction display
Not for Golf 1Cabrio Article 5141 fits here

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/