Vehicle filter
Dispatch until 5:30 pm ISO 9001 certified Dealer prices for workshops and specialist dealers
Article successfully added.

1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT

ThyssenKrupp - Bilstein
Preview: 1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT Preview: 1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT
1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT
1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT
   
198.05€* 204.18€*

Prices incl. VAT plus shipping costs

Available immediately

This item will be shipped today if you order within 14 hours and 15 minutes!

  • Order number: 3935
  • Manufacturer: ThyssenKrupp - Bilstein
Description Matching Vehicles Evaluations 0
Description
1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT Original Bilstein... more
Close menu
1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT

Original Bilstein

Description:
If your vehicle vibrates several times while driving on uneven roads or when pushed down while stationary, the shock absorbers may be defective and should be replaced. Creaking and squeaking noises are also an indication of this. Here you can get high-quality replacements from the Bilstein brand. In addition to the original B4 replacement, you can usually also find sportier, stiffer B6 and shortened B8 variants in our shop.
This shock absorber insert is suitable for the specified models with a Bilstein strut. The damper marking race describes the parameter. This consists of the rebound and compression stages of the damper. If you are looking for stiffer (sportier) or softer shock absorbers, you will find many other parameters in our shop.

Notes:
Three different front axle damper struts were installed as standard in the F and G models from '72-'89.

Bilstein Axle Bone (Green):
Depending on requirements, the parton insert can be exchanged. These can be found under the item numbers 3904 (set 1944), 3927 (set 1961), 3935 (set 1966), 3928 (set 1962) and 3551 (set 1924).

Boge/Sachs-Achsbein (Black):
The shock absorbers are bolted and can be replaced with a Bilstein damper. Here too we offer you a selection of different parameters under the item numbers 3926 (Set 1960), 3902 (Set 1942) and 3903 (Set 1943).
G models from 07/85 have an axle strut with an external thread, which is why the shock absorber 3946 (set 1975) (set 1975) with an internal thread of the union nut is suitable for this case.
The cartridge key 1989 with an inner diameter of 55mm is required for installation.

Koni axle leg (red):
Can be exchanged for a Bilstein axle leg. We also offer axle legs in two configurations under the numbers 3929/3930 (set 1987) and 3905/3906 (set 1984).

August Bilstein founded the AUBI company in Ennepetal as early as 1873 and began developing and supplying monotube gas pressure dampers in 1954 - a significant contribution to the history of the automotive industry. From 1961 onwards, the company entered racing and particularly equipped Porsche and Formula 1 racing cars. Since then, Bilstein has stood for excellent quality and offers various solution concepts for many premium manufacturers. After the takeover of Krupp Stahl AG in 1991 and the merger with Thyssen in 1997, the company name ThyssenKrupp Bilstein GmbH was created.

Additional Information:

? Shock absorber design: monotube upside-down
? Shock absorber type: gas pressure
? Parameter: 200/170
? Suitable for original shock absorber manufacturer: Bilstein


Reference numbers:
91134191310,   911.341.913.10,   911 341 913 10
91134191305,   911.341.913.05,   911 341 913 05


Scope of delivery:
According to illustration

Suitable for:
911 year '72-'89
Vehicles with Bilstein axle struts

Product Safety Information:
Manufacturer:
thyssenkrupp Bilstein GmbH
August-Bilstein-Strasse 4
58256 Ennepetal - DE
Email: info@bilstein.de
Website: https://bilstein.com/
Related links to "1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT"
Matching Vehicles
Close menu
Brand Model Type Platform Year of manufacture Motor Restrictions
Porsche 911 2.3 S 911 F 1971/08-1973/08 2341 ccm, 140 KW, 190 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.3 E 911 F 1971/08-1973/12 2341 ccm, 121 KW, 165 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.3 T 911 F 1972/01-1973/12 2341 ccm, 96 KW, 130 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.7 SC Carrera RS 911 F 1972/08-1979/01 2687 ccm, 154 KW, 209 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.3 T 911 F 1971/08-1973/12 2341 ccm, 103 KW, 140 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.7 S Carrera 911 F 1973/08-1976/01 2687 ccm, 129 KW, 175 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.7 911 G 1975/09-1977/06 2687 ccm, 121 KW, 165 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 SC 911 G 1980/08-1983/07 2993 ccm, 150 KW, 204 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 SC 911 G 1974/03-1983/10 2993 ccm, 154 KW, 209 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.2 Carrera 911 G 1984/02-1987/06 3164 ccm, 152 KW, 207 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 SC 911 G 1977/07-1980/06 2993 ccm, 132 KW, 180 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 SC 911 G 1979/09-1980/06 2993 ccm, 138 KW, 188 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 2.7 911 G 1973/09-1975/08 2687 ccm, 110 KW, 150 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.2 911 G 1986/08-1989/08 3164 ccm, 160 KW, 218 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 SC 911 G 1975/09-1977/06 2993 ccm, 147 KW, 200 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.2 Carrera 911 G 1983/08-1989/08 3164 ccm, 170 KW, 231 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.3 Turbo 930 Turbo 1977/09-1987/06 3299 ccm, 221 KW, 301 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.3 Turbo 930 Turbo 1986/06-1989/08 3299 ccm, 221 KW, 300 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.3 Turbo 930 Turbo 1986/09-1990/11 3299 ccm, 243 KW, 330 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 3.0 Turbo 930 Turbo 1975/01-1977/12 2993 ccm, 191 KW, 260 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.3 S 911 F 1971/09-1973/08 2341 ccm, 140 KW, 190 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.3 E 911 F 1971/08-1973/12 2341 ccm, 121 KW, 165 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.3 T 911 F 1972/01-1973/12 2341 ccm, 96 KW, 130 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.7 SC Carrera RS 911 F 1972/08-1979/01 2687 ccm, 154 KW, 209 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.3 T 911 F 1971/09-1973/12 2341 ccm, 103 KW, 140 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.0 SC 911 G 1975/09-1977/06 2993 ccm, 147 KW, 200 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.7 S 911 G 1973/08-1976/01 2687 ccm, 129 KW, 175 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.0 SC 911 G 1977/07-1980/06 2993 ccm, 132 KW, 180 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.0 SC 911 G 1979/09-1980/06 2993 ccm, 138 KW, 188 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.7 911 G 1973/09-1975/08 2687 ccm, 110 KW, 150 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.2 Carrera 911 G 1984/01-1987/12 3164 ccm, 152 KW, 207 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 2.7 911 G 1975/09-1977/06 2687 ccm, 121 KW, 165 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.2 Carrera 911 G 1986/08-1989/08 3164 ccm, 160 KW, 218 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Targa 3.3 Turbo 930 Turbo 1986/09-1990/11 3299 ccm, 221 KW, 301 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.2 Carrera 911 G 1983/08-1984/08 3164 ccm, 170 KW, 231 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.0 SC 911 G 1982/08-1983/07 2993 ccm, 150 KW, 204 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.2 Carrera 911 G 1984/10-1989/08 3164 ccm, 152 KW, 207 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.2 Carrera Speedster 911 G 1986/08-1989/08 3164 ccm, 170 KW, 231 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.2 Carrera Speedster 911 G 1986/08-1989/08 3164 ccm, 160 KW, 218 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Porsche 911 Cabriolet 3.3 Turbo 930 Turbo 1986/09-1989/08 3299 ccm, 221 KW, 301 PS Fahrwerk:für Fahrzeuge mit Standard Fahrwerk
Evaluations 0
Read, write and discuss reviews... more
Close menu
Customer evaluation for "1x shock absorber insert for PORSCHE 911 F G BILSTEIN B6 racing FRONT"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with* are required.

Customers also bought
Customers also bought
1x wheel nut for PORSCHE 911 F G 964 993 996 914 924 944 928 986 1x wheel nut for PORSCHE 911 F G 964 993 996 914 924 944 928 986
6.90€* 9.90€*
O-ring for PORSCHE like 99970108450 O-ring for PORSCHE like 99970108450
4.19€* 7.19€*
Coupling rod for Porsche 911 G 3.2 Carrera from '86- 930 +screws at the rear L +R Coupling rod for Porsche 911 G 3.2 Carrera from '86- 930 +screws at the rear L +R
61.66€* 64.90€*
2x stabilizer bearing 18mm for PORSCHE 911 G 3.0 930 964 993 944 968 rubber REAR 2x stabilizer bearing 18mm for PORSCHE 911 G 3.0 930 964 993 944 968 rubber REAR
20.90€* 23.90€*
Spacer ring bike bearing for Porsche 911 F G 930 914-6 wheelbase front Spacer ring bike bearing for Porsche 911 F G 930 914-6 wheelbase front
36.31€* 39.90€*
2x clamps brake hose for PORSCHE 356 B C 911 F G 964 968 914 retaining spring 2x clamps brake hose for PORSCHE 356 B C 911 F G 964 968 914 retaining spring
5.99€* 8.99€*
Rubber bearing rear axle for Porsche 911 f/g 930 axis handlebars set 85 Shore Rubber bearing rear axle for Porsche 911 f/g 930 axis handlebars set 85 Shore
62.61€* 65.90€*
4x stabilizer warehouse 20mm for Porsche 911 G SC 930 Turbo -'86 rubber bearings in front 4x stabilizer warehouse 20mm for Porsche 911 G SC 930 Turbo -'86 rubber bearings in front
24.90€* 27.90€*
Slids + steering cuffs for Porsche 911 F G 930 Turbo 914 conversion ÜRO Slids + steering cuffs for Porsche 911 F G 930 Turbo 914 conversion ÜRO
104.67€* 110.18€*
1x window regulator switch for PORSCHE 911 SC 930 G window regulator switch 1x window regulator switch for PORSCHE 911 SC 930 G window regulator switch
16.90€* 19.90€*
2x shock absorbers for PORSCHE 911 F G BILSTEIN B6 Clubsport REAR 2x shock absorbers for PORSCHE 911 F G BILSTEIN B6 Clubsport REAR
357.86€* 368.93€*
Viewed
Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction