Snight rod for Porsche 928 4.5 928S to -'85 l = r LC

Snight rod for Porsche 928 4.5 928S to -'85 l = r LC

Good and cheap - also available as a premium variant

Description:
The joints on tie rods are subject to wear, which mostly starts with a torn cuff. Once the fat has been washed out of the axial joint or tie rod head, the ball joint is excluding within a few 1000 kilometers. At the latest at the TÜV, the defective rubber cuffs or joint heads are objected to. Depending on the Porsche model, the tie rods can consist of two or three main components. This includes the axial joint as an inner ball joint in front of the steering gear and the so -called tie rod head at the outer end of the tie rod. Sometimes axial joint and tie rod head are also directly connected, as with the 924/944 and 968. Because the change of the tie rod always requires a new chassis measurement with setting the pre -track, it is advisable to completely exchange the tie rod depending on the condition. In the 924/944, the tie rods differ in length and whether interior/outer thread on the head. If in doubt, you can also check your thread type and score visually. Another difference: With the 1987 model year, the 944 received the so -called "wide axis". The tie rod heads of the cars with power steering and/or wide axis always have an outer thread and are screwed onto the poles.

The manufacturer "brandless" means that the article was produced by a little common manufacturer from home or abroad. Such products are often the only alternative available on the market so that we cannot fall back on a more established provider. Nevertheless, this article can be used as an inexpensive solution. We have some articles on offer both as a brandless low budget variant and as a high -quality premium variant.

Reference numbers:
92834703110,   928.347.031.10,   928 347 031 10
92834703101,   928.347.031.01,   928 347 031 01
92834703103,   928.347.031.03,   928 347 031 03


Scope of delivery:
Accordingly illustration

Suitable for:
928 4.5/928S to 12/85
Not for 928 from model year 1986 ->they need #6995
Spursten length without a tie rod head 255mm

Product Safety Information:
Manufacturer:
partworks GmbH
Otto-Stadler-Str. 9c
33100 Paderborn - DE
Email: info@partworks.de
Website: https://partworks.de/