Vehicle filter
Dispatch until 5:30 pm ISO 9001 certified Dealer prices for workshops and specialist dealers
Article successfully added.

2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind

SuperPro
Preview: 2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind Preview: 2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind Preview: 2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind
2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind
2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind
2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind
     
32.67€* 35.90€*

Prices incl. VAT plus shipping costs

Available immediately

This item will be shipped today if you order within 0 hours and 8 minutes!

  • Order number: 6961
  • Manufacturer: SuperPro
Description Matching Vehicles Evaluations 0
Description
2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind Many... more
Close menu
2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind

Many other parts of the chassis in stock

Description:
The most common cause of a defect on the stabilizer is damaged rubber sockets. Due to the briefing of the rubber bearings, the stabilizer loses its damping over time. Due to the mechanical load, the stabilizer is lined up after a certain time and rigid, which leads to polter noises in the chassis. Defective stabbing sockets are also noticeable through spongy driving behavior on the corner drive.

Superpro chassis sockets replace the original rubber bearings, which quickly wear out due to the susceptibility of the rubber material compared to environmental influences. Polyurethane, on the other hand, offers a much longer durability and improves handling and driving experience.

Please check the diameter of your stabilizer before ordering.

Superpro is a manufacturer of polyurethane chassis sockets, the quality of which we rely on. PU can have very different material properties depending on material composition and additives. With decades of experience, this Australian manufacturer is a leader in its field. Superpro is considered the inventor of the PU chassis sockets in the industry. In its design, the brand was often copied by market attendants, but the quality was never achieved. With these PU sockets you need no thoughts about noise, wear or material failure. All Superpro sockets have a TÜV approval.

Additional Information:

? Inner diameter: 16mm


Reference numbers:
90133379304,   901.333.793.04,   901 333 793 04
90133379301,   901.333.793.01,   901 333 793 01


Scope of delivery:
2x Pu warehouse

Suitable for:
911 f -68
912
914

Product Safety Information:
Manufacturer:
SuperPro Deutschland GmbH
Bergstrasse 20
91074 Herzogenaurach - DE
Email: info@superpropoly.de
Website: https://www.superpropoly.de/
Related links to "2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind"
Matching Vehicles
Close menu
Brand Model Type Platform Year of manufacture Motor Restrictions
Porsche 911 2.0 L 911 F 1967/08-1968/11 1991 ccm, 110 KW, 150 PS
Porsche 911 2.0 S 911 F 1966/07-1968/11 1991 ccm, 118 KW, 160 PS
Porsche 911 2.0 L 911 F 1963/01-1968/12 1991 ccm, 96 KW, 130 PS
Porsche 911 Targa 2.0 L 911 F 1964/11-1968/11 1991 ccm, 96 KW, 131 PS
Porsche 911 Targa 2.0 L 911 F 1967/08-1968/11 1991 ccm, 110 KW, 150 PS
Porsche 911 Targa 2.0 S 911 F 1966/07-1968/11 1991 ccm, 118 KW, 160 PS
Porsche 911 Targa 2.0 S 911 F 1966/07-1972/02 1991 ccm, 125 KW, 170 PS bis 68
Porsche 911 Targa 2.0 T 911 F 1967/06-1972/02 1991 ccm, 81 KW, 110 PS bis 68
Porsche 912 1.6 912 1965/01-1969/12 1582 ccm, 66 KW, 90 PS
Porsche 912 Targa 1.6 912 1965/03-1970/02 1582 ccm, 66 KW, 90 PS
Porsche 914 1.8 -- 1973/08-1976/02 1795 ccm, 63 KW, 86 PS
Porsche 914 1.8 -- 1974/01-1975/12 1795 ccm, 56 KW, 76 PS
Porsche 914 1.7 -- 1969/01-1973/12 1679 ccm, 59 KW, 80 PS
Porsche 914 2.0 -- 1969/11-1973/12 1991 ccm, 81 KW, 110 PS
Porsche 914 2.0 -- 1972/01-1975/12 1971 ccm, 74 KW, 100 PS
Porsche 914 2.0 -- 1973/01-1974/12 1971 ccm, 70 KW, 95 PS
Evaluations 0
Read, write and discuss reviews... more
Close menu
Customer evaluation for "2x stabilizer warehouse 16mm for Porsche 911 2.0 912 914 PU sockets sports behind"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with* are required.

Customers also bought
Customers also bought
1x coupling rod bushing for PORSCHE 911 F G 930 914 REAR 1x coupling rod bushing for PORSCHE 911 F G 930 914 REAR
6.90€* 9.90€*
1x clip trim for PORSCHE 911 F G 964 993 914 door door shaft clips 1x clip trim for PORSCHE 911 F G 964 993 914 door door shaft clips
5.98€* 8.98€*
Screw cap for PORSCHE like 81185784501C Screw cap for PORSCHE like 81185784501C
2.82€* 9.99€*
Cap for PORSCHE like 111905449 Cap for PORSCHE like 111905449
5.89€* 8.89€*
Cutting disc for Porsche 914 Cutting disc for Porsche 914
93.28€* 98.19€*
Kugelpfann switching stick for Porsche 911 F G SC 3.2 914 gear lever bearing Kugelpfann switching stick for Porsche 911 F G SC 3.2 914 gear lever bearing
6.90€* 9.90€*
12x stud bolts cylinder head for PORSCHE 356 911 F G heat exchanger M8x20 12x stud bolts cylinder head for PORSCHE 356 911 F G heat exchanger M8x20
21.86€* 24.86€*
2x stabilizer bearing 16mm for Porsche 911 2.2 2.4 912 914 PU sockets Sports front 2x stabilizer bearing 16mm for Porsche 911 2.2 2.4 912 914 PU sockets Sports front
32.67€* 35.90€*
2x sockets switching rod coupling for Porsche 356 B C 911 F G 930 914 924 PU 2x sockets switching rod coupling for Porsche 356 B C 911 F G 930 914 924 PU
19.60€* 22.60€*
2x socket coupling rod for Porsche 911 F G 930 914 behind 2x socket coupling rod for Porsche 911 F G 930 914 behind
10.90€* 13.90€*
Fair ring gearbox for Porsche 356 911 914 Enterwelle Fair ring gearbox for Porsche 356 911 914 Enterwelle
10.90€* 13.90€*
Fair ring gearbox for Porsche 911 '72 -'86 915 914 924 drive shaft Fair ring gearbox for Porsche 911 '72 -'86 915 914 924 drive shaft
10.90€* 13.90€*
Bush lever for Porsche 911 T E S 2.0 2.2 914 Ring below Bush lever for Porsche 911 T E S 2.0 2.2 914 Ring below
8.90€* 11.90€*
Box switching stick for Porsche 911 F/G SC 914 Lager Shift linkage optimized Box switching stick for Porsche 911 F/G SC 914 Lager Shift linkage optimized
14.90€* 17.90€*
Bushing shift rod for PORSCHE 914 from '73- sliding ring shift rod REAR Bushing shift rod for PORSCHE 914 from '73- sliding ring shift rod REAR
11.90€* 14.90€*
Engine mount for PORSCHE 914 engine mount INSIDE L+R Engine mount for PORSCHE 914 engine mount INSIDE L+R
53.14€* 56.14€*
1x stabilizer bracket for PORSCHE 911 up to -'77 914 holder REAR 1x stabilizer bracket for PORSCHE 911 up to -'77 914 holder REAR
15.06€* 18.06€*
Engine gasket set for PORSCHE 914 2.0 crankcase cylinder head Engine gasket set for PORSCHE 914 2.0 crankcase cylinder head
60.71€* 63.90€*
1x axle boot for PORSCHE 911 2.0 F 912 914 2.0 REAR 1x axle boot for PORSCHE 911 2.0 F 912 914 2.0 REAR
13.90€* 16.90€*
Gear knob for PORSCHE 911 F T E S up to -'71 914 901 gearbox 5-speed Gear knob for PORSCHE 911 F T E S up to -'71 914 901 gearbox 5-speed
21.90€* 24.90€*
Joint fork coupling rope for Porsche 356 914 911 F/G S SC to -'87 Bowden train Joint fork coupling rope for Porsche 356 914 911 F/G S SC to -'87 Bowden train
6.90€* 9.90€*
Cover Shifting linkage for Porsche 914 Lid side circuit switching stick Cover Shifting linkage for Porsche 914 Lid side circuit switching stick
36.31€* 39.90€*
2x gearbox for Porsche 914 motor warehouse in front 2x gearbox for Porsche 914 motor warehouse in front
94.91€* 99.90€*
Bellows clutch cable for PORSCHE 911 F G '70-'77 914 rubber cuff Bellows clutch cable for PORSCHE 911 F G '70-'77 914 rubber cuff
8.80€* 11.80€*
Viewed
Dispatch until 5:30 PM Telephoneservice ISO 9001 certified High customer satisfaction